| HPBCANADA.COM http://hpbc.ca/ |
|
| Voodoo http://hpbc.ca/viewtopic.php?f=20&t=1754 |
Page 1 of 1 |
| Author: | BigGull [ November 6th, 2013, 12:12 pm ] |
| Post subject: | Voodoo |
Any suggestions as to separating the deck from the hull? I have drill out the rivets and removed the rub rail. The two were separated at the transom but spear to be bonded around the rest of the surface. Just wondering what others have used for tools or techniques. It's a 87 and never been apart before. |
|
| Author: | LittleCharger [ November 6th, 2013, 12:31 pm ] |
| Post subject: | Re: Voodoo |
If your tearing apart anything glass related you can't be without one of these. http://www.canadiantire.ca/en/pdp/maste ... 8251p.html Buy the cheap ones the fiberglass dust kills anything you use eventually so don't waste your money on the good stuff, burn them up and return them within the warranty period. I assume the deck is glassed to the hull from the inside where the two meet, you will have to cut the glass with the multicrafter tool if you can access it, watch you don't cut through the deck. |
|
| Author: | wildcatt [ November 6th, 2013, 1:20 pm ] |
| Post subject: | Re: Voodoo |
LittleCharger wrote: If your tearing apart anything glass related you can't be without one of these. http://www.canadiantire.ca/en/pdp/maste ... 8251p.html Buy the cheap ones the fiberglass dust kills anything you use eventually so don't waste your money on the good stuff, burn them up and return them within the warranty period. I assume the deck is glassed to the hull from the inside where the two meet, you will have to cut the glass with the multicrafter tool if you can access it, watch you don't cut through the deck. Yup - handy tool for sure. You'll probably go through a pile of blades, so buy the bulk pack, if they are available. |
|
| Author: | BigGull [ November 6th, 2013, 2:06 pm ] |
| Post subject: | Re: Voodoo |
Thanks guys, I'll head there on the way home. Anything to make it easier! |
|
| Author: | sheuninck [ November 6th, 2013, 4:49 pm ] |
| Post subject: | Re: Voodoo |
all the voodoos were glassed together at the factory. the rivits only held the rub rail on. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| © 2000, 2002, 2005, 2007 phpBB Group • http://www.phpbb.com | |