87 mod vp glass repair.

BoomerMuskoka · **Posted:** April 5th, 2013, 11:19 pm

i started into the hull today didn't do much but i ground a few cracks down the're not into the glass, i have alott of grinding sanding and filling ,, gonna be sweet..

i some safety gear to test out..

BoomerMuskoka · **Posted:** May 2nd, 2013, 2:57 pm

p man · **Posted:** May 2nd, 2013, 4:39 pm

I've always had good luck with grinding out gel cracks with a flapper wheel like this. They are way easier to control then a thick grinding stone. Finish with a 60 and 120 orbital sander and fill with 3m marine premium filler (vinyl ester) Cheap and CT carries it.
220 that then work your way up to a 400 with a high build type primer and you shouldnt see the repairs.
http://www.canadiantire.ca/AST/browse/6 ... ?locale=en
Looking good though

BoomerMuskoka · **Posted:** May 2nd, 2013, 8:29 pm

thanks pat, im not sure what i will be using yet,, still grinding, then im gonna do some grinding and then some more grinding, then i have to build a transom, and possibly do some more grinding :lol:

,, that slopy mess of fiber glass was a peice of transom the guy i bought it off stuck in,, wasn't hard, luckily the guy didnt know how to add hardener to resin :roll:

would of been a b^%$h to get out,, plus some more rot i had to cut out..,, i hate when people half cut out a transom and start trying to molest half a transom back in,,, i put a good dent in it today still have several hours on the grinder,, i had it smoking today, :mrgreen:

LittleCharger · **Joined:** April 1st, 2012, 12:29 am **Posts:** 1444

I think what Pat is suggesting is to use a flap disc on the grinder and put the stone grinder wheel away, the flap disc does a nicer job and gives a better contour and is easier to control. They do remove material well.

http://www.bing.com/images/search?q=Fla ... tedIndex=2

Cheers,

BoomerMuskoka · **Posted:** May 3rd, 2013, 7:29 am

LittleCharger wrote:

I think what Pat is suggesting is to use a flap disc on the grinder and put the stone grinder wheel away, the flap disc does a nicer job and gives a better contour and is easier to control. They do remove material well.

http://www.bing.com/images/search?q=Fla ... tedIndex=2

Cheers,

i think pat is agreeing with me using a flap disk,, note pic 1. flap disk on a grinder... :lol:

im not sure what ill use for fill and primer,i might try duratek primer

if i can do a big area with it... i have a buddy thats going to order everything thru his business for me.

p man · **Posted:** May 3rd, 2013, 9:10 am

It looked to me like you had a rigid wheel on your grinder.

BoomerMuskoka · **Posted:** May 3rd, 2013, 2:28 pm

ic, nope flapper 40 and 80 ....., 80 100 on the orbital, im going to have to do the core on this pig aswell ffs..found a hole and its rotten

BoomerMuskoka · **Posted:** May 7th, 2013, 11:40 am

few ponies.

HPBCANADA.COM

87 mod vp glass repair.

Who is online