looks like the 50 and 60 are available in short shaft..
https://www.tohatsu.com/marine/na/outboards/mfs60a.html
| HPBCANADA.COM http://hpbc.ca/ |
|
| Tohatsu 4strokes available in Short Shaft http://hpbc.ca/viewtopic.php?f=19&t=4356 |
Page 1 of 1 |
| Author: | mattmak [ November 30th, 2020, 2:26 pm ] |
| Post subject: | Tohatsu 4strokes available in Short Shaft |
looks like the 50 and 60 are available in short shaft.. https://www.tohatsu.com/marine/na/outboards/mfs60a.html
|
|
| Author: | David [ November 30th, 2020, 9:51 pm ] |
| Post subject: | Re: Tohatsu 4strokes available in Short Shaft |
The US website shows availability in 15, 20, and 25. The Canadian web site doesn’t show more than 20 HP |
|
| Author: | mattmak [ December 1st, 2020, 9:22 am ] |
| Post subject: | Re: Tohatsu 4strokes available in Short Shaft |
the Canadian brochure does include the short 60. https://www.tohatsu.com/marine/na/tech_ ... chure.html decent specs: 213lbs, 3cyl, 53cu.in., short shaft, power trim, small gearcase, ok ratio - 2.08:1 |
|
| Author: | Roflhat [ December 2nd, 2020, 4:34 am ] |
| Post subject: | Re: Tohatsu 4strokes available in Short Shaft |
That's pretty light for a 4 stroke, wonder if you can adapt a pull start onto one. Pull off the power trim, change to 1.86 gears and it would make a decent thundercat engine |
|
| Author: | David [ December 3rd, 2020, 4:57 pm ] |
| Post subject: | Re: Tohatsu 4strokes available in Short Shaft |
A prop calculator shows 23" pitch required to hit 60 mph with 8% slip. 56 mph with a 22" prop. It would make a good cottage VooDoo motor |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| © 2000, 2002, 2005, 2007 phpBB Group • http://www.phpbb.com | |