HPBCANADA.COM
http://hpbc.ca/

OMC wiring terminal 310680 - equivalent? (pics)
http://hpbc.ca/viewtopic.php?f=19&t=3915
Page 1 of 1

Author:  mattmak [ March 2nd, 2018, 11:48 am ]
Post subject:  OMC wiring terminal 310680 - equivalent? (pics)

anyone know if this terminal is used an any other applications, like automotive.. So I can find them through auto parts/electronics stores?

Image
ImageImage
ImageImageImage

thanks,
M

Author:  Northbase [ March 2nd, 2018, 4:04 pm ]
Post subject:  Re: OMC wiring terminal 310680 - equivalent? (pics)

Likely available through Pico.
Most NAPA stores carry Pico products.

Author:  mattmak [ March 2nd, 2018, 5:45 pm ]
Post subject:  Re: OMC wiring terminal 310680 - equivalent? (pics)

I tried Pico. Pico had the other style used for the same harness: GM Series 56, perfect fit.
But they did not have these in the catalog.

Author:  mattmak [ March 2nd, 2018, 7:00 pm ]
Post subject:  Re: OMC wiring terminal 310680 - equivalent? (pics)

ok, so I found them.

"Packard/Delphi Twin Lock terminals". used in 1960's Chev/GM. For example in the "bulk head connector": C1/C2 Corvette comes up as one application. 67 Impala too.

This is based on the note "6288953" when you look the part up on boats.net. Looks like that is a Delphi part number for the 12ga version of these terminals/pins.

Packard Twin Lock here:
http://www.rowand.net/shop/Tech/Automot ... ectors.htm

I dunno yet where to purchase them.

Author:  Northbase [ March 2nd, 2018, 8:36 pm ]
Post subject:  Re: OMC wiring terminal 310680 - equivalent? (pics)

If you can’t find / source them through a good auto parts store you could try McMaster & Carr. If they have them I can order them through a local supplier up here.
If it’s a Delphi part you may want to get a Delphi crimp tool......best crimper you’ll ever use!.....

Author:  MGR [ March 3rd, 2018, 9:38 pm ]
Post subject:  Re: OMC wiring terminal 310680 - equivalent? (pics)

What part of the motor are you using these. I changed all connectors on mine to deutsch connectors. Much better contact and weather tight.

Author:  Northbase [ March 3rd, 2018, 10:21 pm ]
Post subject:  Re: OMC wiring terminal 310680 - equivalent? (pics)

MGR wrote:
What part of the motor are you using these. I changed all connectors on mine to deutsch connectors. Much better contact and weather tight.


......or weather pac......
Easy to get through PICO.

Author:  OMCFORME [ March 4th, 2018, 11:37 am ]
Post subject:  Re: OMC wiring terminal 310680 - equivalent? (pics)

mattmak wrote:
anyone know if this terminal is used an any other applications, like automotive.. So I can find them through auto parts/electronics stores?

thanks,
M


Well to start, your friendly local OMC/Bombardier dealer can order them in for you :mrgreen:

CDI Electronics sells an OMC terminal kit with a selection of OMC terminals that has these in it, it’s part number 912-9708. CDI has Canadian dealers. Make sure you have the appropriate crimper as well (Bluepoint makes them for example).

Matt

Author:  mattmak [ March 4th, 2018, 1:03 pm ]
Post subject:  Re: OMC wiring terminal 310680 - equivalent? (pics)

The first thing I tried was the OMC part number at local Bombardier dealers. They are not even available through boats.net or larger US dealers.
They are not anywhere in the Pico line, not even in their weather pack.
The CDI terminal pack I just looked up and looking at photos, they are maybe included but the Kit is $54 USD. I was hoping to just find a pack of 10 locally.
Gunna try Antique Chev in Waterdown on Mon.. If cant get em, gunna have to chose to buy some NOS off ebay or just convert to 4mm bullets.
I was hoping for a quick find but looks like even people looking for these for their mid-60's Chevy's have had hard time finding them based what I've seen in forum posts, etc..

Thanks for the suggestions folks.

Author:  OMCFORME [ March 4th, 2018, 1:16 pm ]
Post subject:  Re: OMC wiring terminal 310680 - equivalent? (pics)

mattmak wrote:
The first thing I tried was the OMC part number at local Bombardier dealers. They are not even available through boats.net or larger US dealers.
They are not anywhere in the Pico line, not even in their weather pack.
The CDI terminal pack I just looked up and looking at photos, they are maybe included but the Kit is $54 USD. I was hoping to just find a pack of 10 locally.
Gunna try Antique Chev in Waterdown on Mon.. If cant get em, gunna have to chose to buy some NOS off ebay or just convert to 4mm bullets.
I was hoping for a quick find but looks like even people looking for these for their mid-60's Chevy's have had hard time finding them based what I've seen in forum posts, etc..

Thanks for the suggestions folks.


Glad you checked your local dealer first - they need our support :mrgreen:
There are >10 of these available at Marineengine.com, for $3.50 each usd. I believe they pull NoS parts inventories from numerous dealerships. I’ve bought lots of stuff from them, works great.

Those connectors are in the CDI kit by the way.
Matt

Page 1 of 1 All times are UTC - 5 hours [ DST ]
© 2000, 2002, 2005, 2007 phpBB Group • http://www.phpbb.com